一、基本情况

王敏卜，女，1994年出生，博士，讲师。主要从事金属材料教学及科研工作，研究方向主要包括增材制造阻裂与强韧化机理、高性能铝合金成分设计、激光增材制造成形及修复技术。以第一/通讯作者在《Materials Science and Engineering: A》、《International Journal of Refractory Metals and Hard Materials》、《Acta Metallurgica Sinica (English Letters)》等国内外学术期刊上发表论文数篇，曾获中国有色金属工业科学技术发明一等奖（排3）、湖南省自然科学二等奖（排6）。

二、学习经历

2018/09–2023/05 中南大学，材料科学与工程，博士

2015/09–2018/06 中南大学，材料工程，硕士

2011/09–2015/06 中南大学，粉体材料科学与工程，学士

三、工作经历

2023/06–至今 必赢766net手机版

四、研究方向

1. 激光增材制造高性能铝合金阻裂、强化成分设计研究；

2. 激光增材修复铝合金、不锈钢技术研究及性能评估。

五、研究项目与平台建设

参与国家自然科学基金面上、重点项目共3项。

六、研究成果论文

[1] Minbo Wang, Ruidi Li*, Tiechui Yuan et al., The evolution of quasicrystal during additive manufacturing and aging treatment of a Si-modified Al-Mn-Sc alloy. Materials Science and Engineering: A, 2022, 859: 144206

[2] Minbo Wang, Ruidi Li*, Tiechui Yuan et al., Microstructures and mechanical property of AlMgScZrMn - A comparison between selective laser melting, spark plasma sintering and cast. Materials Science and Engineering: A, 2019, 756: 354-364

[3] Minbo Wang, Ruidi Li, Tiechui Yuan* et al., Microstructure and Mechanical Properties of Selective Laser Melted Al-2.51Mn-2.71Mg-0.55Sc-0.29Cu-0.31Zn Alloy Designed by Supersaturated Solid Solution. Acta Metallurgica Sinica (English Letters), 2022, 35: 354-368

[4] Minbo Wang, Ruidi Li*, Tiechui Yuan* et al., Selective laser melting of W-Ni-Cu composite powder: Densification, microstructure evolution and nano-crystalline formation. International Journal of Refractory Metals and Hard Materials, 2018, 70: 9-18

[5] Ruidi Li*, Minbo Wang, Zhiming Li, Peng Cao, Tiechui Yuan, Hongbin Zhu*, Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms. Acta Materialia, 2020, 193: 83-98

[6] Ruidi Li*, Minbo Wang, Tiechui Yuan* et al., Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties. Powder Technology, 2017, 319: 117-128

[7] Ruidi Li*, Minbo Wang, Tiechui Yuan* et al., Microstructural Modification of Laser-Deposited High-Entropy CrFeCoNiMoWC Alloy by Friction Stir Processing: Nanograin Formation and Deformation Mechanism. Metallurgical and Materials Transactions A, 2017, 48: 841-854

[8] Qian Hua, Ruidi Li, Minbo Wang, Hongbin Zhu, Xinyan Liu, Duan Lai, Jinfeng Li, Tiechui Yuan, High Cycle Fatigue Property of Al-Mg-Sc-Zr Alloy Fabricated by Laser Powder Bed Fusion, Advanced Engineering Materials, 2023, 25 (17)

[9] Jingtao Kang, Ruidi Li, Minbo Wang, Dan Zheng, Pengda Niu, Tiechui Yuan, Comparative analysis of microstructure and mechanical properties in FeMnAlNi alloys fabricated via casting and additive manufacturing. Materials Science and Engineering: A, 2024, 915: 147216

[10] Zhihui Zhou, Jie Xia, Minbo Wang, Ruidi Li, Tiechui Yuan, Effect of grain size on tribological behavior of hot-pressed boron carbide sliding against alumina balls. International Journal of Applied Ceramic Technology, 2024, 21: 2136-2150

[11] 刘阳，徐靖，宁挺，杨洪宇，谭振国，郭世柏，王敏卜*，激光粉末床熔融Inconel718合金工艺优化与组织演变，中国粉体技术，2024，30(01)：23-35

七、国家发明专利

[1] 李瑞迪，王敏卜，袁铁锤，王银，牛朋达，张志坚，一种高强铝合金3D打印专用无钪Al-Mg-Mn合金粉末及其制备方法，ZL 201911365008.7，发明专利

[2] 祝弘滨，王敏卜，李瑞迪，刘昱，龚明，袁铁锤，牛朋达，一种增材制造铝合金强度及延伸率可控的热处理方法，ZL 201911018645.7，发明专利

[3] 祝弘滨，王敏卜，折洁，李瑞迪，王行涛，李明高，赵明元，龚明，3D打印铝镁合金粉末及其制备方法与应用，ZL 202210855335.6，发明专利

八、育人成效

[1] 激光增材制造心血管支架用镍钛形状记忆合金组织性能调控，指导省级大学生创新训练项目；2024-2025。